JSON-LD markup generated by Google Structured Data Markup Helper.

Go to…

Honda

Home / Honda

We Service and Repair all Honda cars

  • 2007 Honda Civic

    Honda Civic
    Mileage
    367,450
    Service Date
    8/14/2024
    Services Performed
    • A/C COMPRESSOR – Remove & Replace – Gas – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
     
    YATZIM N. gave our service a 5 star review on 8/14/2024

  • 2017 Honda Civic

    Honda Civic
    Mileage
    87,583
    Service Date
    5/15/2024
    Services Performed
    • FOUND: We scanned vehicle for trouble codes and found, C0051 Steering angle sensor failure. U0126 CAN communication failure with absolute steering wheel angle sensor. C1420 Main torque sensor and sub torque sensor incorrect correlation. C1422 SUB torque sensor malfunction. U0416 VSA system malfunction. We raised vehicle on rack and found that the same electrical harness, leading to the steering rack, is damaged by rodents. 2 of the 4 electrical wires have been chewed on. We repaired the 2 wires and secured the electrical harness. We cleared all trouble codes and test drove vehicle to verify no more steering issues are present.
     
    LEXIE F. gave our service a 5 star review on 5/15/2024

  • 2017 Honda Civic

    Honda Civic
    Mileage
    79,333
    Service Date
    1/3/2024
    Services Performed
    • FOUND: We scanned for trouble codes and found, C0051 Steering angle Sensor. U0126 Communication Failure with absolute steering wheel angle sensor. C1420 Main torque sensor sub torque sensor incorrect correlation/torque angle sensor incorrect correlation. C1421 Main torque sensor malfunction. We raised vehicle on rack and removed lower splash shield and found more severed wires that go to the steering position sensor. We also found some exposed wires on the front end, under the radiator, so we covered them with electrical tape. We repaired wires and lowered vehicle and cleared codes then we calibrated steering angle sensor and all warning lights turned off. Test drove vehicle and vehicle drives great.
    • Removed driver door inner panel and found that lock actuator rod was not connected. Removed outer door handle in order to route the actuator rod properly and re assembled door. Now door lock is completely functional and it locks and unlocks all doors.
     
    LEXIE F. gave our service a 5 star review on 1/3/2024