2006 Chrysler PT Cruiser
Mileage
116,000
Service Date
6/29/2024
Services Performed
- Removed all wheels for a brake inspection and found rear brake shoes are in good shape. Brake shoes have been replaced not too long ago. Front brake pads are at about 85% life left. The brake fluid is dark and needs a brake fluid flush. New brake fluid will definitely help with the low brake pedal.
- Removed 1 broken wheel stud, driver rear wheel, installed new stud and a new lug nut.
- Scanned vehicle for trouble codes and found, Active Codes, P0108 Manifold Absolute Pressure sensor circuit high. Stored Codes, P1684 Battery was disconnected B210D Battery voltage low U0101 Lost Communication with TCM, Transmission Control Module U0100 Lost Communication with ECM, Engine Control Module B212D Ignition Run Only Input Circuit open. Watched live data on scanner and found that the MAP sensor is not feeding back any data. The MAP sensor is broken and needs to be replaced.
- Removed old broken MAP sensor and replaced with New sensor. Cleared all trouble codes and test drove vehicle and verified there is NO check engine light on.
- INSPECT ALL HYDRAULIC LINE AND HOSES. INSPECT CALIPERS AND WHEEL CYLINDERS. INSPECT MASTER CYLINDER AND CAP. FLUSH ENTIRE BRAKE SYSTEM INCLUDING MASTER CYLINDER, CALIPERS, WHEEL CYLINDERS UNTIL CLEAN.
- Hazardous Waste Disposal Fee (Cal)
STAN G. gave our service a 5 star review on 6/29/2024
